AIF - pfc series 1600 watts total power: 1600 watts 120 - 370 vdc (configurable) input voltage: 85 - 264 vac # of outputs: single special features ? unity power factor ? high effciency - up to 95% ? universal input voltage and frequency range ? up to 1600 w output power ? positive and negative enable function ? parallelable with accurate current sharing ? <10% harmonic distortion conform - ing to iec1000-3-2 compliance ? 100c baseplate operating temperature ? dc input option ? power fail warning signal ? enable output to control dc-dc converter ? eeprom data storage via i 2 c interface ? external inrush current limited protection ? power density up to 290 w/in 3 ? two year warranty safety ? ul 60950 recognized ? cul 60950 recognized ? tuv en60950 licensed electrical specifcations input input range 85 - 264 vac / 120 - 370 vdc (confgurable) input surge 290 vac / 1s input frequency 50/60 hz effciency 95% @ 230 vac, 1600 w (typical) total harmonic distortion less than 10% power factor 0.99 typical (po 500 w); 0.97 typical (po 1000 w) output output voltage 380v typical (io =4.2 a / vi > 180 vac); 393 v typical (io = 0a) note: vin peak must always be lower than vout current share accuracy 10% max overvoltage protection 430 max power limit for ac input for dc input vin = 85 vac, pmax = 1000w; vin = 230 vac, pmax = 1600w case; vin = 370 vdc, pmax =1600w control power fail warning direct drive output to opto-isolator power fail warning adjust 195 to 355 vdc adjustable ld enable direct drive output to opto-isolator pfc enable ttl compatiable voltage adjust 76% to 100% vo dc input enable clock input (external sync) 6 vp-p typical @ 1 mhz 5% clock output (int. clock) 6 vp-p typical @ 1 mhz 5% temperature monitor output 10 mv/c current monitor output 0 to 1 ma (1 ma = 4.2 a output) i 2 c interface notes: nominal values apply with sense pins disconnected and other control pin unconnected. data sheet power
environmental specifcations operating temperature -20 c to +100 c (baseplate temperature) startup temperature -40 c to +100 c (baseplate temperature) storage temperature -40 c to +120 c overtemperature protection 120 c max mtbf 1million hours ordering information model number description notes AIF04zpfc-01l 1600 w low profle pc module for parallel operation the total input current must be <16arms. AIF04zpfc-02l 1600 w low profle pc module designed for parallel operation where the total input current >16arms, requires external rail rectifers. AIF04zpfc-01nl negative enable AIF04zpfc-01nl negative enable 1. fon non-thread hole, add suffx -nt. pin assignments input (ac) output control pins 31. l1 21. positive 1. pv aux - 32. l1 22. positive 2. temp mon 33. l2 23. negative 3. c mon 34. l2 24. negative 4. c share 5. clk out 6. clk in 7. pv aux + 8. sda 9. scl 10. dc enable 11. v adj 12. pfw adj 13. s gnd 14. pfw 15. ld enable 16. pf enable AIF-pfc series data sheet
mechanical drawings AIF-pfc series-ds 11feb2015 AIF-pfc series data sheet worldwide offices americas 2900 s.diablo way tempe, az 85282 usa +1 888 412 7832 europe (uk) waterfront business park merry hill, dudley west midlands, dy5 1lx united kingdom +44 (0) 1384 842 211 asia (hk) 14/f, lu plaza 2 wing yip street kwun tong, kowloon hong kong +852 2176 3333 for more information: www.artesyn.com/power for support: productsupport.ep@artesyn.com while every precaution has been taken to ensure accuracy and completeness in this literature, artesyn embedded technologies assumes no responsibility, and disclaims all liability for damages resulting from use of this information or for any errors or omissions. artesyn embedded technologies, artesyn and the artesyn embedded technologies logo are trademarks and service marks of artesyn embedded technologies, inc. all other names and logos referred to are trade names, trademarks, or registered trademarks of their respective owners. ? 2015 artesyn embedded technologies, inc. www.artesyn.com
|
